Skip to main content
Las Vegas & area concrete contractor · Free written estimates
(725) 900-7371

Brands · Sika

Elastomeric Sika Concrete Repair and Waterproofing

When water intrusion or structural concrete damage threatens a foundation or basement, Sika delivers the chemistry to seal and restore. Las Vegas Concrete applies Sika waterproofing, crack injection, repair mortars and floor systems in the full manufacturer sequence, with primer, body and topcoat installed to spec. Every project includes a free written estimate.

  • Full Sika system installation
  • Elastomeric waterproofing specialist
  • Free written estimate, firm schedule

Below-grade protection and repair

Where Sika Repair Systems Earn Their Keep

Concrete fails when water finds a path. Sika waterproofing membranes (Sikalastic, Sikagard) block that path with elastomeric coatings that move with the slab instead of cracking off like rigid products do.

When a crack is already active and leaking, Sika crack injection (SikaFix HH, SikaFlex) fills from the inside, stopping the leak and stabilizing the substrate without excavation.

Spalled or structurally compromised concrete gets rebuilt with Sika MonoTop repair mortars, which restore the original profile and strength. SikaTop floor systems handle the finished surface. This same discipline runs through our basement waterproofing and foundation repair work.

On the job
foundation crack ready for Sika crack injection in Las Vegas
reinforced foundation wall being prepped for Sika waterproofing in Las Vegas

Installation sequence

How Sika Systems Get Installed in Las Vegas

  1. Assess the concrete condition

    We evaluate whether the issue is active water ingress, a structural crack, spalling or a finished-surface need, then select the matching Sika product line and chemistry for the substrate.

  2. Prepare the surface

    Concrete is cleaned and profiled to the moisture and texture the Sika system requires. Cracks are routed and cleared if injection is the solution.

  3. Install primer, body, topcoat

    The full Sika system goes down in the published sequence, at the temperature and thickness the spec calls for, with the right chemistry for the environment and load.

  4. Cure and hand off warranty

    Each layer cures to the manufacturer schedule. The install is documented for the product warranty, and you receive the data sheets for future compatibility.

Elastomeric chemistry for wet areas

Sika Waterproofing and Injection Below Grade

Most Sika work happens on foundation walls and under slabs. Sika waterproofing systems seal the path before water takes it, with elastomeric chemistry that flexes as the concrete moves and settles.

Inside the building, Sika crack injection stops active leaks through walls and slabs without digging up the exterior, and Sika MonoTop mortars rebuild structural concrete to the original profile. Together they prevent the repeat project that happens when a rigid coating cracks off the next spring. Our foundation installation and basement concrete work both rely on this approach.

Schedule a Sika assessment
reinforced foundation wall waterproofed with a Sika system in Las Vegas
4 Sika product lines
Elastomeric Chemistry type
Free Written estimate

Common questions

Sika Questions Answered

Which Sika line for which job, injection, waterproofing and warranty in Las Vegas.

Often, yes. Sika crack injection with SikaFix HH polyurethane seals active cracks from inside the wall and stops the leak, without needing to excavate the outside of the foundation in most cases.
Sika waterproofing is a system applied to a whole wall or slab to keep water out. Crack injection is a targeted repair that seals a specific crack already letting water through.
Yes, the right one can. Sika MonoTop repair mortars rebuild spalled and structural concrete to original profile and strength, with the chemistry chosen to suit whether the repair is cosmetic or load-bearing.
Because elastomeric chemistry actually flexes with concrete movement. A rigid coating cracks where the substrate moves, and the leak comes back. Sika systems were developed to flex and seal, which is why they hold up below grade.
Yes. We install Sika products as a system, primer, body and topcoat in the published sequence and chemistry. That is what keeps the manufacturer warranty intact and what makes the install actually perform.

Client reviews

What Las Vegas Clients Say About Their Sika Installs

★★★★★ 4.9 · 87 reviews on Google
Read all reviews →
★★★★★

Sika crack injection stopped a leak we had chased with caulking for years. They sealed it from inside and the basement has been dry through two springs.

M. E.
Homeowner
★★★★★

Full Sika waterproofing on a new foundation. Elastomeric so it can flex with the concrete and not crack off the way the old rigid coating did.

A. D.
Builder
★★★★★

SikaTop repair on a worn loading-dock area. Profile is exact, took our forklift traffic, and they handed over the data sheets for our records.

J. E.
Commercial property manager
★★★★★

They install Sika as a full system, not just a coat of the product they have on the truck. That difference shows up in how long the install holds.

L. G.
General contractor

Ready to start

Get a Free Sika Estimate Today

A leaking foundation, an active crack, spalled concrete or a floor that needs repair, tell us what is happening and we will spec the right Sika system and send a written, itemized quote.

We'll spec the Sika system and send a written quote within one business day.