Sub-zero storage demands concrete that survives temperature swings, moisture pressure and heavy equipment traffic. Standard coatings fail. We install and repair freezer-floor systems engineered for thermal cycling, with moisture control built in from the start. Free written estimate.
A freezer slab faces conditions no standard warehouse floor encounters. Every door opening sends a temperature shock through the concrete. Moisture vapor wants to push up from below. The slab expands and contracts with each cycle. A generic epoxy coating will blister, peel or crack within months.
The right freezer floor coating is formulated for sub-zero thermal cycling, with a moisture-vapor barrier matched to the slab's actual conditions. The prep work addresses the base and any existing moisture before the coating is applied. Skip the vapor strategy and you are guaranteeing a repeat job.
When a freezer floor has already begun to fail, freezer floor repair means grinding back to sound concrete, diagnosing and fixing the moisture cause, and installing a system built for the next decade. This mirrors our approach to manufacturing facility concrete work.
Recent work
Installation sequence
How We Install Freezer Floor Coatings in Las Vegas
Assess the thermal and moisture profile
We measure the temperature range, test for moisture and vapor transmission, evaluate the slab condition, and confirm the equipment loads and operational schedule.
Select the right coating system
Based on the environment, we choose a thermal-cycling-rated system with the correct vapor barrier and adhesion profile for the slab.
Prepare the concrete base
We grind, clean and address any moisture or base issues. The slab must be sound and dry before coating application begins.
Apply and cure at proper temperature
The coating is applied to manufacturer specifications at the required ambient temperature. We coordinate warm-up and cool-down with your operations so the floor is fully cured before sub-zero returns.
Failing freezer floors
Repair That Lasts, Not Annual Recoating
A peeling or blistering freezer floor is almost never just a coating problem. The system that failed was likely not rated for thermal cycling, or the moisture and vapor strategy was never addressed. Recoating with the same product guarantees the same failure.
Real cold storage concrete repair grinds back to solid concrete, identifies and fixes the moisture source, and installs a system engineered for the environment. It is a project, not a maintenance line item. We bring the same rigor to warehouse floor and manufacturing concrete repair work.
Thermal cycling, moisture, repair and operations for cold storage concrete in Las Vegas.
No. A standard epoxy will lift, blister or crack the first time the slab thermal-cycles. Freezer floor coatings are specifically engineered for the sub-zero environment, vapor pressure and cycling.
Almost always vapor or the wrong system. Without addressing moisture coming through the slab and using a coating rated for thermal cycling, the next install will fail the same way. Repair means fixing the cause, not just the surface.
Usually yes. The coating system cures at a specified ambient temperature. We coordinate the warm-up and cool-down with operations so the freezer is offline for the minimum required window.
Often, zone by zone. We isolate the work area, warm it up while the rest of the facility stays at temperature, then bring it back to operating temperature on schedule. Phasing is mapped with operations.
It is generally more involved because the prep, vapor strategy and system are all specialty work, and the operational coordination adds time. The trade-off is a floor that lasts, instead of a repeat project every couple of years.
Client reviews
What Las Vegas Cold Storage Operators Say About Their Freezer Floors
Previous coating peeled within a year. They diagnosed the vapor problem, fixed the base and used a cycling-rated system. Two winters later still sealed and intact.
R. D.
Cold storage operations
★★★★★
Zone-by-zone freezer floor recoat. We never lost the cold chain on the storage side and they coordinated every warm-up and cool-down with us.
N. W.
Freezer warehouse manager
★★★★★
Repaired the slab properly, addressed the moisture, and rebuilt the floor right. A real engineering job, not just a coat of paint.
A. G.
Distribution facilities lead
★★★★★
They warned us a cheaper option would not last and explained why. The system they recommended has shrugged off the cycling and the forklifts both.
P. M.
Cold chain operations
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Las Vegas.
New coating, zone repair or full slab replacement, send us the temperature profile and operation details and we will engineer the system and provide a written quote.
