A polished concrete floor uses the slab itself as the finished floor, ground flat, honed through progressive grit, and polished to the gloss level chosen. Las Vegas Concrete polishes commercial slabs for retail spaces, offices, showrooms and any commercial environment where a hard, light-reflective, low-maintenance floor is the right answer. The result lasts decades because it is the slab, not a coating on it. Every project starts with a free written estimate.
Polished concrete is not a coating. It is a mechanical refinement of the slab itself, progressive diamond grits that grind, hone and polish the concrete to whatever gloss level the design calls for, then a densifier that hardens the surface chemically so it stays sharp. There is no layer on top to peel; the floor is the slab.
That makes it ideal where the floor needs to last decades, where maintenance has to be minimal, and where a light-reflective surface contributes to ambient brightness without adding skylights. Retail, showroom, office, mixed-use commercial; polished concrete works in all of them.
We assess the existing slab for hardness, flatness and surface condition, repair any cracks or spalls that need to be addressed before polishing, and confirm the target gloss level with you.
Grind through coarse grits
The slab is ground through progressive coarse diamond grits to flatten the surface, expose the desired aggregate level (cream, salt-and-pepper or full aggregate), and prepare it for honing.
Densify and hone
A penetrating densifier is applied to chemically harden the slab, then progressive honing grits refine the surface, smoothing the texture and beginning to develop sheen.
Polish to gloss level
Final polishing grits bring the slab to the agreed gloss level, matte, satin or high-sheen, and a guard coat is applied to protect the surface for the first months of use.
Look and care
Polished Floors Show the Slab You Have
Polished concrete is honest about the slab. The aggregate exposure level decided up front, cream-only for a soft uniform look, salt-and-pepper for moderate variation, full aggregate for a terrazzo-like surface, shows the actual concrete that was poured. Slabs with hairline shrinkage cracks show them; slabs with patches show them.
We do a small mockup grind before committing to the full polish so the look is confirmed with you on your actual slab. Maintenance is light, dust mop or auto-scrubber, and the densifier re-application schedule is in the project handoff. Coordinate with adjacent commercial epoxy or other commercial floor systems if back-of-house has different floor needs.
Aggregate exposure, gloss levels, maintenance and when polished beats other finishes.
Most can, but very rough or very out-of-tolerance slabs need preparation first. We assess the existing slab, identify any work needed (crack repair, spall patching, self-leveling underlayment for badly out-of-tolerance areas), and quote that work alongside the polish.
Three common levels: cream-only (soft uniform finish, no aggregate showing), salt-and-pepper (small aggregate exposed), and full aggregate (large stones exposed, terrazzo-like look). We mock up a small area on your slab so you choose with the actual concrete in front of you.
Matte for low-glare, soft retail; satin for offices and general commercial; high-sheen for showrooms and where light reflection is the design goal. We agree the level up front; the final grit pass is what determines it.
Daily dust mopping or auto-scrubbing keeps it looking sharp. The densifier is periodically refreshed (every several years depending on traffic) to maintain hardness. No waxing, no stripping, no top-coat re-application like with an epoxy.
Floor area drives the timeline; a typical commercial polish runs over several days from grind to final polish and guard. Most of that is the polish work itself; the floor is usable shortly after the guard cures. The full schedule is in the quote.
Client reviews
What Las Vegas Operations Say About Their Polished Floors
Polished slab in our showroom. Reflects the lighting beautifully, no maintenance beyond a daily auto-scrub. Three years in, the floor looks the same as the install day.
Z. U.
Retail Store Manager, Las Vegas
★★★★★
Salt-and-pepper exposure was the right choice for our office; not too busy, not too plain. The mockup before the full polish was the moment we knew.
Y. U.
Office Facility Manager, Henderson
★★★★★
High-sheen polish in a car showroom. The vehicles look incredible on the reflective floor, and the maintenance is dramatically lower than the epoxy we had before.
Q. V.
Showroom Director, Boulder City
★★★★★
Polished concrete in the public lobby. Wears like granite, looks like designer concrete. The visiting tenants always comment on it.
X. V.
Mixed-Use Building Owner, North Las Vegas
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Las Vegas.
Tell us the floor area and the look you want and we will mock up a small grind on your slab before committing to the full polish, and quote the project in writing.
