Every path needs to shed water, stay level underfoot, and grip when wet. We pour sidewalks and walkways on solid base, set the cross-slope for drainage, and finish them broom or decorative to match your home's existing concrete. New construction, decorative upgrades, and repair all backed by a free written estimate.
A walkway that pools water becomes a skating rink when temperatures drop. The slab itself may be sound, but standing water freezes, expands, and heaves the concrete. We start with a compacted granular base, set forms to a deliberate cross-slope (typically two percent), and pour the slab so water sheds away from the house and adjacent surfaces.
The finish matters too. A plain concrete sidewalk gets a broom texture for traction. When the path is also a design element, stamped patio patterns or exposed aggregate finishes add visual interest while staying grippy underfoot. Control joints are cut on a grid so seasonal movement stays clean.
If an older path has heaved or cracked but the base is intact, concrete walkway repair can re-level and resurface it for a fraction of a full tear-out. We assess the base on a free site visit before recommending the best path forward.
Recent work
The sequence
How We Build a Concrete Walkway Step by Step
Site walk and layout
We trace the route with you, confirm width and endpoints, and mark the cross-slope so water runs away from structures and low spots.
Excavate and base prep
The path is excavated to depth, a compacted granular base is laid, and wooden or metal forms are set to the finished grade and slope.
Place and finish the slab
Concrete is poured, screeded level, and finished with a broom for traction or stamped and sealed if decorative.
Joint and cure
Control joints are cut on layout, the slab cures per schedule, and the finished path is tied cleanly to steps, driveways, or patios it meets.
Finish options
Plain or Decorative Walkway Finishes
A standard concrete sidewalk with a broom finish is the workhorse. It drains, it grips, and it lasts. But a path is also the line your eye follows across the yard, and a decorative walkway in stamped or exposed-aggregate concrete can tie the whole landscape together.
We match the pattern, colour, and texture to your existing driveway, patio, or front steps so a new path reads as part of the design, not a patch. When an older walkway is cracked or heaved but the base is still sound, walkway repair can bring it back without the cost and disruption of a full replacement. We confirm the base condition on a free visit and recommend the most practical solution.
Slope, finishes, drainage and repair for concrete sidewalks and walkways in Las Vegas.
A slight cross-slope, usually around two percent, lets rain and meltwater run off instead of pooling and then freezing. A flat or back-sloped path becomes an ice hazard every thaw, so we build the slope into the base and forms.
A broom finish is the standard for traction. Decorative walkways in exposed-aggregate or textured stamped concrete also stay grippy wet, while a smooth trowel finish does not and is not used outdoors.
Yes. We match the finish, pattern and colour to the driveway, patio or steps already in place so the new sidewalk reads as part of the yard, not a patch.
Often, yes. If the base is still sound, walkway repair can re-level, patch or resurface the path for far less than a full tear-out. We confirm the base on a free visit before recommending either.
Most walkways are placed in a day. You can walk on it within 24 to 48 hours, with the exact timing in the cure schedule we hand over. Decorative finishes are sealed once the slab has cured.
Homeowner reviews
What Las Vegas Homeowners Say About Their Concrete Walkways
Whether you need a new path, a decorative upgrade to match your patio, or repair on a heaved section, tell us the route and the finish you want and we will schedule a free site visit with a written, itemised quote.
