Industrial MasterTop Floor Systems for Las Vegas Facilities
When a warehouse floor or manufacturing slab needs to handle traffic, chemicals, or temperature swings, MasterTop delivers the epoxy and urethane cement coating matched to the job. We install as a BASF-system contractor, following spec on every layer so your warranty is real.
The MasterTop line spans standard epoxy for light-to-moderate traffic zones, high-build epoxy for heavy forklift and equipment movement, and urethane cement for food processing, breweries, and chemical-exposure areas where thermal shock or aggressive solvents are part of the daily environment. The slab itself doesn't change, but the coating system does.
Installation follows the BASF protocol: substrate prep to profile, primer application, body coat at engineered thickness, topcoat, and cure documentation. Skipping steps or mixing products voids the warranty, so we follow the spec exactly. That discipline is what separates a system warranty from a product warranty.
We walk the slab, document traffic patterns, chemical exposure, temperature swings, and slip requirements. This assessment determines which MasterTop system (standard epoxy, high-build, or urethane cement) is the right fit.
Prepare slab to BASF profile
The concrete is diamond-ground to remove contaminants and old coatings, cracks are repaired with BASF-compatible materials, and the surface is primed with the matched MasterTop primer coat.
Apply MasterTop system layers
Body coat is applied at the engineered thickness, aggregate is broadcast where specified, and topcoat is applied per the system spec. Each layer cures fully before the next begins.
Document and hand off
Material batch records, application thickness logs, and cure schedule are compiled and provided with the floor. The facility receives maintenance protocol and warranty documentation.
Why spec matters
BASF-Spec Installation Discipline Protects Your Floor
A MasterTop system warranty is only valid when installed by a BASF-certified contractor following BASF specifications for prep, primer, body coat thickness, cure time, and topcoat. Substituting materials, applying at the wrong thickness, or rushing cure voids the warranty. We follow the protocol because that is what makes the warranty enforceable.
System selection, urethane cement, warranty scope, and phased installation.
Based on the facility use: traffic load, chemical exposure, thermal cycling, slip rating, decorative requirements. We assess the actual conditions and recommend the matched system from the BASF range.
Yes, for severe environments (food processing, breweries, freezer floors, chemical-aggressive zones) MasterTop has urethane cement formulations. Standard epoxy MasterTop handles moderate environments.
Yes when installed to BASF spec by a BASF-system installer. System warranty extends beyond product to install integrity, which is the value over generic product warranty.
Yes, by zone-phased install. Each zone is offline during install and cure with operations routed around the work zone. Phasing is built around your operations from quote stage.
Per zone, typically a week including cure before service. Facility-wide projects stretch with phased install. Full schedule in the quote.
MasterTop urethane cement in our chemical exposure zone. Three years of operation, no degradation, BASF warranty in our file. The brand discipline pays off.
Z. H6
Plant Manager, Las Vegas
★★★★★
High-build MasterTop across our warehouse zones. Forklift traffic for two years, no spalling at the joints, no surface wear. Right system for the use.
Y. H6
Distribution Director, Henderson
★★★★★
BASF-spec install with documentation. The system warranty paperwork came at handoff, supporting our facility records and any future audit need.
Q. H6
Facility Director, Boulder City
★★★★★
They matched the MasterTop system per zone in our multi-use facility instead of one system everywhere. Better outcomes, smaller total cost. Real engineering match.
X. H6
Operations Lead, North Las Vegas
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Las Vegas.
Describe your facility use, zone layout, and any special requirements. We will recommend the matched MasterTop system and provide a written quote with schedule.
